Potentiometer

$75.00

Replacement potentiometer. Used to adjust speed on block shavers.

SKU: ppotentiometer Categories: ,

Description

Instructions to Change the Potentiometer:

 

  • After taking the dial off loosen the silver screw and take the white shaft out then unclip the back off (black box part).
  • On the back of thepotentiometer 1) Yellow 2) Black 3) Red– screw wires in (clamp in each number, screw it down and make sure it’s secure).
  • Clip the black box back onto the back.
  • Put the white shaft back onto the screw insidepotentiometer and then twist it by hand all the way on- then tighten it with a screw driver- not overly tight. 
  • Turn it all the way clock wise to the # 9 position.
  • Take the dial and twist it all the way back to make sure it goes all the way. (At about 3 it will stop–firmly push it till it’s back to one).

Additional information

Weight .0125 lbs
Dimensions 8 × 4.5 × 2 in

You may also like…