Pressure Flap – Plastic


Holds ice in place in block shaver.

SKU: pflap Categories: ,


Instructions for Replacing the Pressure Flap: Keep track and note everything you do as you do it so you can put it back together the right way! First unplug the machine and set it on the floor. Next remove the hood and unscrew the top plate from the base/housing (the part the ice sits in). Once the plate is unscrewed (there should be one screw in each corner to remove) set the plate on the floor leaning at an angle with the back of the plate on the floor and the front in the air (so it’s leaning on the motor). From there you can more easily reach the 3 bolts that hold the pressure flap in place. Once you remove the bolts you can take off the broken pressure flap and replace it by aligning the holes with the screws and secure them in place. Now just set the top plate back on the base housing and screw it back on and you’re good to go!

Additional information

Weight .7 lbs
Dimensions 15.75 × 6 × 2.5 in

You may also like…